Water damage is one of the most common issues faced by iPhone users around the world. While the iPhones are known for their advanced technology and durability, they are not invincible. Accidents happen, and when they involve water and your iPhone, things can go south quickly. If your iPhone has been submerged in water or exposed to moisture, it is essential to act quickly to prevent permanent damage. In this informative article, we will discuss some proven hacks and methods to get water out of your iPhone and potentially save it from irreparable damage. So, keep reading to learn how to fix your waterlogged iPhone.
1. What to do when your iPhone gets wet: Steps to take before trying to get water out
How To Get Water Out Of iPhone
If your iPhone gets wet, it can be a stressful experience. It’s essential to act quickly to prevent further damage. Follow these steps before attempting to remove water from your device.
Step 1: Turn Off Your iPhone
The first step is to turn off your iPhone to prevent water from causing further damage to your device. Press the power button and slide to power off.
Step 2: Remove Your iPhone Case
If you have a case on your iPhone, remove it immediately. The case can trap water inside the device and prevent it from drying out.
Step 3: Dry Your iPhone With A Cloth
Use a dry cloth or towel to wipe your iPhone and remove any excess water. Ensure that the cloth is clean and free from any debris that can scratch your screen.
Step 4: Remove Your SIM Card
Take out your SIM card to prevent any water from getting to the important components inside your iPhone.
Step 5: Place Your iPhone In A Dry Environment
Find a dry room or area and leave your iPhone to dry out. Avoid any areas with high humidity, such as the bathroom or kitchen, as this can delay the process.
Ways to Avoid Water Damage
It’s always better to be proactive than reactive. Here are some ways to prevent water damage to your iPhone:
- Do not use your iPhone near water
- Use a waterproof case to protect your device
- Avoid using your iPhone with wet hands
- Do not place your iPhone near water sources such as sinks or bathtubs
- If you own a waterproof iPhone model, make sure the seals are intact and replace them if damaged
By following these steps and being proactive towards preventing water damage, your iPhone should remain in good condition for longer, and you can avoid costly repairs.
2. Can you fix a waterlogged iPhone at home? DIY methods for drying out your device
If your iPhone has taken a swim, your first instinct may be to try to dry it out at home. While taking your device to a professional is always the safest option, there are a few DIY methods that you can try to dry out your iPhone and hopefully avoid any permanent damage.
DIY Method 1: Rice
One of the most popular DIY methods for drying out a waterlogged iPhone is to place it in a bowl of dry rice. The idea behind this method is that the rice will absorb any moisture inside the device, leaving it dry. To try this method, follow these steps:
1. Turn off your iPhone immediately and remove it from any case or cover.
2. Use a cloth to gently wipe off any visible water on the outside of the phone.
3. Place your iPhone in a bowl of dry rice and make sure it is completely covered.
4. Leave your iPhone in the rice for at least 24 to 48 hours to allow the rice to absorb all the moisture.
It’s important to note that using rice is not a guarantee that your device will be fixed, and in some cases, it can actually cause more damage. The rice may leave tiny particles inside the device which could obstruct the charging port or speakers.
DIY Method 2: Silica Gel Packets
Another DIY option to dry out your iPhone is to use Silica Gel Packets. These small packets of silica can be found in many of your everyday items, including shoe boxes and bags of beef jerky. Silica is a desiccant, which means it absorbs moisture. Follow these steps to use silica gel packets to dry out your iPhone:
1. Turn your iPhone off and remove it from any case or cover.
2. Use a cloth to gently wipe off any visible water on the outside of the phone.
3. Place your iPhone in a sealable plastic or paper bag and add a few silica packets.
4. Seal the bag and leave the iPhone in it for at least 24 to 48 hours to allow the silica packets to absorb all the moisture.
Silica gel packets are generally safer than rice and are less likely to leave particles inside the device. However, like the rice method, using silica gel packets is not a guarantee that your device will be fixed.
In conclusion, while there are a few DIY methods to dry out your waterlogged iPhone, these methods are not always successful, and can sometimes cause more damage. It’s always best to seek professional help or take your device to an Apple store if you’re unable to fix it yourself.
3. How to remove water from iPhone speakers, microphone, and charging port
After your iPhone gets wet, it is important to remove any water from the speakers, microphone, and charging port to prevent further damage. Water can interfere with the electrical connections causing the device to short circuit. Here are some methods to remove water from your iPhone:
Use a dry cloth or towel
The first thing you should do is to remove all excess water on the surface of the device using a dry cloth or towel. Gently wipe your iPhone making sure to remove the water on the exterior, including the speakers, microphone, and charging port. Avoid using any type of heat source as it can cause further damage to the device.
Use a vacuum cleaner
Using a vacuum cleaner can be an effective method to remove water from your iPhone, especially from ports such as the headphone jack or charging port. Make sure to use a low-power setting to avoid causing damage. Place the vacuum nozzle over the port and let it remove the water. If you use this method, avoid using the vacuum cleaner directly on the microphone or speaker.
Use a moisture-absorbing substance
You can use moisture-absorbing substances like rice or silica gel packets to remove water from the device. Put your iPhone in a sealed container with the moisture-absorbing substance for at least 24 hours. The substance will absorb the moisture from the device. Avoid using cat litter or other substances that may leave residue in the phone.
By following these simple methods, you can remove water from the speakers, microphone, and charging port of your iPhone. Remember, it is important to act as quickly as possible to minimize the damage. If you are unsure about how to proceed or if your iPhone does not turn on after following these steps, seek professional help.
4. The dos and don’ts for drying your iPhone: Important tips to avoid causing further damage
.
When your iPhone gets wet, it’s crucial to dry it out as soon as possible to prevent further damage. However, there are some dos and don’ts that you need to keep in mind when drying your iPhone. Following these tips can help you avoid causing further harm to your device.
The Dos:
1. Turn Off Your iPhone
The first thing you need to do when your iPhone gets wet is to turn it off. Water can cause a short circuit that can destroy your iPhone’s internal components. So, it’s essential to turn off your iPhone as soon as possible.
2. Gently Wipe Your iPhone
Use a soft, lint-free cloth to gently wipe your iPhone. Carefully remove any water droplets from the exterior of your device, including the screen and the back. Make sure that you don’t apply too much pressure, as it can force water further inside.
3. Use a Desiccant
A desiccant is a substance that can absorb moisture. You can use products like silica gel or rice to soak up the moisture from your iPhone. Put your iPhone in a sealed container or bag with the desiccant and let it sit for at least 24 hours. This method can help remove most of the water from your device.
The Don’ts:
1. Don’t Use Heat
While it’s tempting to use a hairdryer or put your iPhone in the oven to dry it out, this method can cause further damage. The heat can melt the plastic components, destroy the circuit board, and warp the battery.
2. Don’t Charge Your iPhone
Don’t try to charge your iPhone when it’s wet. It can cause a short circuit, which can damage the charging port and battery. Also, don’t connect your iPhone to a computer as it can also cause further damage.
3. Don’t Shake Your iPhone
Some people believe that shaking their iPhone can help remove water droplets. However, it can cause more damage as it can force water further inside your device. Don’t shake your iPhone to remove water droplets.
5. What to do if your iPhone won’t turn on after getting wet: Troubleshooting tips and next steps
.
If your iPhone won’t turn on after getting wet, don’t panic. There are a few troubleshooting steps you can take to try and get your device working again. Here are some tips and next steps to consider:
1. Give it time to dry
Firstly, make sure your iPhone is completely dry before attempting to turn it on. Even if it appears to be dry on the outside, there may still be water inside that could cause damage if you try to power up your device. Leave your iPhone to dry out for at least 24-48 hours, placing it in a dry and warm area with good air circulation. You can place it in a bag of uncooked rice or silica gel packets to help absorb any remaining moisture.
2. Try to charge it
After the drying period, try connecting your iPhone to a charger to see if it powers up. If it does, then you may be in luck and won’t need to take any further steps. However, if your device still won’t turn on, keep reading for more troubleshooting options.
3. DFU restore or professional repair
If your iPhone still won’t turn on after trying to charge it, you may need to perform a DFU (Device Firmware Update) restore or take it in for professional repair. This is a more extreme step and should only be attempted if you are comfortable with this approach. Alternatively, you can take your device to an authorized repair center or Apple store for assistance.
Remember that water damage can be tricky to fix, and there’s no guarantee that your iPhone will work again. However, by taking the recommended precautions and following these troubleshooting tips, you increase the chances of getting your device back up and running.
People Also Ask
1. How can I tell if there is water in my iPhone?
If water has gotten into your iPhone, there are a few signs to look out for, such as difficulty turning on the device, dimming or blackouts on the screen, and distorted sounds when playing audio.
2. What should I avoid doing if there is water in my iPhone?
If you suspect water has gotten into your iPhone, it’s important to avoid turning it on, plugging it in, or pressing any buttons. Doing so can cause further damage to the phone and make it less likely to be repairable.
3. Can I use rice to dry out my iPhone?
While rice is a popular DIY method for drying out a wet iPhone, it’s not always effective. Instead, it’s recommended to use a professional drying agent or bring the phone to a technician for repair.
4. How long does it take for water damage to affect an iPhone?
Water damage can affect an iPhone immediately, especially if the phone has been submerged for an extended period of time. However, it may take a few hours or even days for the full extent of the damage to become apparent.
5. Can an iPhone still be repaired if it has water damage?
In many cases, an iPhone with water damage can be repaired by a professional technician. However, the success of the repair depends on the severity of the damage and how quickly the phone is brought in for repair.
Conclusion
Getting water out of an iPhone can be a stressful and challenging process. It’s important to avoid turning the phone on, plugging it in, or pressing any buttons if water has gotten inside. While DIY methods like rice may work in some cases, it’s often best to bring the phone to a professional technician for repair. Prompt action and proper care can give your iPhone the best chance of being salvaged from water damage.
